THE PE 201-17 POWER SUPPLY BOARD
100 WATTS OF POWER

All of our boards, (except some relay boards) operate from 12Vdc. This power supply board can provide a wide range of inputs and outputs (see model selection table). When the board is ordered as part of a chassis assembly, the power supply output is typically wired in parallel to all slots in the chassis. However, some configurations include a chassis filled with power supplies whose outputs are then distributed through our fuse alarm panel. The power supply input is typically wired on the rear of the unit through screw terminals or line cord as appropriate.

THE PE 201-19 RELAY BOARD
8 RELAYS, 2 OUTPUTS FROM EACH CONTACTS RATED AT 2 AMPS/EACH

Have one input but require two isolated dry contact closure outputs? The PE201-19 Relay Board contains 8 single pole double throw relays. Each board is wired into a chassis with 50-pin connectors, one for input, one for output. Need screw terminals? See our cross connect section.

Encoder / Decoder Details >